1. Performance Characteristics:
a) The fatigue cycles can be set and displayed;
b) You can set pause cycles number for checking the specimen;
c) With forward, reverse, jog function (makes it easy to adjust the swing arm mounting position of the specimen);
d) Within automatic stop function, when reach the set number, the testing machine will be closed down;
e) In the process of test, the test machine will be shut down when wire rope fractures, and keep the numerical count;
f) Uninterrupted fatigue number of wire rope can reach the maximum count to 9,999,999;
g) The wheels are made of ductile cast iron, wear resistance, hardness reaches HB220, the wheel groove surface roughness less than 0.8μm;
h) The max. test frequency is 50 cycle/min, and you can set the test frequency according to the test requirement;
i) The testing machine can test wire rope specimen range from Φ6mm to Φ16mm, it also can be customized;
j) Each testing wheel and driven wheel has 2 notches for 2 different diameter of wire rope specimen. It is easy to replace and fix the specimen on the testing machine;
k) The testing machine standards with several kinds of weight for you to change the counterweight of different diameter of wire rope. Including 50kg * 3 pcs, 10kg * 10pcs, 5kg * 6pcs, 1.5kg * 4 pcs, 1kg * 4 pcs;
l) The full counterweight: 1000lb (453kg);
m) Dimension of testing machine: 2135mm * 813mm * 2730mm;
n) Weight of testing machine: 1500kg;
o) Power: 5.5kW, 380V, 50Hz, 3-phase;
2. Applications:
Mainly used for fatigue testing of steel wire rope for elevator.
3. Applied Standards:
It conforms to technical specification"51111","51121" released by OTIS.
|
